Services

Among other things, we can offer you the following services:

Analyses of manufactures
as well as their static control equipments, preparation of a report and a concept for a static control manufacture
	Content:	inspection of the manufacture, analysis of the existing static control equipments, control of the effectiveness, preparation of a concept for an optimized static control manufacture, preparation of a report
	Volume:	on inquiry
Code: 9040.000
The basis for the audits and analyses are among the German and international standards: IEC 61340-5-1 and IEC 61340-5-2, partly the American standards ANSI/EIA-625A and MIL-STD-1686A as well as ANSI/ESD-S20.20-2007 and further international standards and regulations.
	Additional:	Preparation of work directions Development of control plans Audit directions Measurement regulations

Realization of measurements, material tests

Measurement of the resistance to ground, the surface resistance according to IEC 61340-4-1 Ed. 2, IEC 61340-5-1 + 5-2, EN 1081, IEC 60093 and valid national and international standards and regulations, for example the American ANSI/EIA and EOS/ESD standards

Measurement of the electrostatic field, search of local electrostatic fields in electronic manufactures and other manufactures, where electrostatic discharges cause damages and production downtimes

Measurement of the static decay time and the shielding behaviour

Code: 9050.000

Examples:

	Fabrics and clothing, gloves and finger cots
	Floor materials, coverings and paintings, glues, cleaning products, sealings
	Packaging materials, bags, boxes, packaging systems

Inspection certificates & reports

Realization of measurements according to the analyses of manufactures and preparation of certificates

Code: 9060.000

Audit of manufactures, workstations and machines
according to IEC 61340-5-1 + 5-2 and the American standards ANSI/EIA-625A as well as ANSI/ESD-S20.20-2007, preparation of a report It is possible to check also single systems, machines and plants, for example production plants, assembly stations beside the ESD workstations and EPAs. The inspections of machines and plants according to IEC 61340-5-1 and 5-2 as well as to ESD SP10.1-2000 count to it.
	Code: 9080.000	Machines
	Code: 9080.001	Racks, trolleys
	Code: 9080.002	Single workstations

	Notice:	It is not enough to ground a machine. The problems are the handled components and assemblies. These have to be protected from electrostatic charges. PCBs and electronic components charge themselves electrostatically. These can’t be discharge only through good electrostatic conductive materials.

Calibration of devices and instruments
1. Calibration of personal test stations, wristband testers etc
	Code: 9801.001	Personal test stations, personal testers, footwear test stations
	Code: 9801.004	Wristband test stations, wristband testers

2. Calibration of resistance measurement instruments
	Code: 9801.002	Resistance to ground and surface resistance testing instruments
	Code: 9801.006	Resistance measurement instruments

3. Calibration of field meters
	Code: 9802.001	Field meters
	Code: 9802.003	PVS 775, 776
	Code: 9802.004	PFK 100, 101

4. Adjustment and calibration of ionisers
	Code: 9803.001	Workstation ionisers
	Code: 9803.002	Overhead ionisers
	Code: 9803.003	Ion guns, nozzles

Service overview - download!